S8000 7.5.0 Update!
Now you have more configuration possibilities on your S8000.
Version 7.5.0 is available for download from our website www.injepro.com/downloads
With it, you can configure the broadband probe option 4.2 or 4.9.
Check the instructions for use:
Before updating, save the maps and logs that are in your module's memory.
- 1. Download the software from www.injepro.com/downloads
;
- 2. After installation, open the software and connect the USB cable to your module;
- 3. In the menu, click on “Connection”, then “Update Module”;
- 4. In the new window, select the 7.5.0 option and click update;
- 5. Carefully read the security guidelines to update your module and click “yes” to continue and wait for the process to complete.
With the updated software and module, receive the active map
In the side menu, access the “Closed Loop” function and define which probe is used.
After selecting the desired option, send the changes made to the map to the module.
Remembering that the 4.2 connector is different from the 4.9, so before purchasing the product, inform which option you want, if you already have the harness, just change the connector to the desired standard.
This configuration option is available on the INJEPRO S8000, T5000 and T10000 modules.
I hope you enjoyed the update. If you have any questions, please contact our support team: +55 45 99834-0022 - http://bit.ly/SuporteAndrey
: +55 45 3037-4040. 
: 